Exploring Hydrological Analyses using SAGA GIS

Introduction to SAGA GIS

SAGA GIS stands for System for Automated Geoscienific Analyses. It is a Geographic Information System software program designed to easily and effectively implement spatial algorithms, for real world situations and education. This geospatial software offers a continuously growing comprehensive set of geoscientific tools/methods. The program has an accessible graphical user interface with various visualization options to help users easily operate the various analysis tools. SAGA is capable of running on both Windows and Linux operating systems. SAGA GIS also comes at no cost for the user because it is a Free Open Source Software for Geospatial analysis (FOSS4G). Being a FOSS4G program allows a high degree of freedom for the user; it allows the user to run the program for any geoscientific purpose, to modify the program, to redistribute copies of it, and to improve the program while sharing those improvements with the public. More information about this program is available at SAGA GIS's Website.

Hydrology Definitions

• Hydrology: Hydrology is the study of the movement, and distribution of water in all parts of the Hydrosphere. The focus of this project is on Watershed Hydrology which deals with surface runoff within specific watersheds, based on regional topography.

• Watershed: A watershed (also known as catchment area or drainage basin) is the area of land where surface water converges to the same lower elevation base point. In this project Okanagan Lake is the baseline of the basin for all the surface runoff.

• Topographic Wetness: The topographic wetness index is a method used to monitor rainfall and runoff. The analysis describes the aptness of an area to be saturated based on the surrounding areas slope characteristics and porosity of the ground surface.

Data

In order to conduct this tutorial and appropriately follow the procedures you will first need to download data that is hydrologically correct and has elevation values for the entire study region. For the hydrological analyses you will essentially need to download a fully processed digital elevation model (DEM) for the region you are interested in. One important thing to note when retrieving DEMs is to make sure that if the elevation data for your area of interest is in separate tiles and requires that they be merged, you must insure that the DEMs were developed at the same resolution, cell size and during the same project. If these ideas are not followed it is possible that the tiles have cliffs within the DEM where the merging has occurred. In specific to this tutorial the study area will be the Okanagan Lake region for which a processed DEM has been acquired from the Natural Resources Canada Geospatial Data Extraction Tool. This data extraction website is great for getting good processed elevation data for much of Canada and also contains other data files for many projects.

Table 1. Data Files Used and Respective Data Sources for Okanagan Lake Hydrological Analysis

Data	Data Format	Data Source
Toponyms for Okanagan Region	Vector Points	Geogratis Layer: Cities and Towns / Producer: Natural Resources Canada
Transportation Network	Vector Polyline	Geogratis Layer: Highways and Municipal Roads / Producer: Natural Resources Canada
Hydrography	Vector Polygon	Geogratis Layer: Rivers and Lakes - Region / Producer: Natural Resources Canada
Digital Elevation Model (DEM)	Raster	Geogratis Layer: Canadian Digital Elevation Model Data / Producer: Natural Resources Canada
Okanagan Region Aspect Map	Raster	Created Data
DEM with Filled Sinks	Raster	Created Data
Catchment Area	Raster	Created Data
Topographic Wetness	Raster	Created Data

Methods Conducted in SAGA GIS for Hydrological Analysis

SAGA GIS Basic Setup

Before you start setting up SAGA GIS for use it is recommended that you acquire the data which you plan to use for your project; be aware of where your data is located in a folder and make sure all of the data you are using is located in that folder.

Opening SAGA GIS

To run your hydrological analyses ensure that SAGA GIS is properly installed onto your computer and functional. If you do not have SAGA GIS you can download it at SAGA GIS homepage.

• If installed and functional, one simply has to locate and click the SAGA GIS icon this will open the initial SAGA GIS window.

• Once SAGA GIS has been opened your user interface will be shown as below.

Figure 1. Screenshot of what the SAGA GIS graphical user interface looks like at start up

Importing DEM

This section will instruct you how to appropriately bring in a processed DEM into SAGA GIS so that you can effectively conduct a hydrological analysis.

• In the SAGA GIS graphical user interface (gui) you will first need to navigate to the Modules pull down menu located within the main menu toolbar at the top of the screen.

• In the Modules menu navigate to File and then to GDAL/OGR and open the GDAL: Import Raster command.
• Once the Import Raster dialogue box has opened you will see that the first row has the word File in the left column and nothing in the right column. You need to click on the empty column, which will result in the box displaying an ellipsis (...) button. You will then click on this button, which will open a file browser, and navigate to your DEM file. When you have located your elevation model file click Open and then in the Import Raster dialogue box click Okay. Note: When downloading when importing a DEM into SAGA, it can be in any raster format (e.g. .rst, .GRID, .tiff) but the tiff format is preferred.
• After you have started the importation process for the DEM file, you can see the progress of the module in the messages window located at the bottom portion of the SAGA gui. When the message window displays Module Execution Succeeded, your DEM has been correctly imported into SAGA.
• One aspect that is important to remember when importing any file into SAGA including the DEM raster file, is that the imported file will show up in the data tab of the workspace, however in order to visually see your data you need to double click on the file name which will open a new window entitled Add layer to selected map, then select new and click OK.
• Now the DEM is been completely and accurately imported into SAGA GIS and will be displayed like Figure 2.

Figure 2. Digital Elevation Model for Lake Okanagan, British Columbia, Canada (Source: NRCan, 2013)

Projecting the Data Properly to Conduct Analysis

In SAGA GIS you will have to begin your analyses by first projecting your DEM file into a Universal Transverse Mercator (UTM) projection system because SAGA works best of this coordinate reference system in regard to hydrology tools. If your DEM was already in a UTM system and in the correct zone for the study region, you can skip this step, otherwise you need to go through the following steps to convert the original projection of the DEM file into a UTM zone system that SAGA can work in.

Steps for Projecting files in SAGA GIS:

• Go to the modules tab in main menu tool bar.
• You than go down to Projection.
• Once you select Projection go to Alternatives
• After selecting Alternatives select Proj.4(Command Line Arguments,Grid)
• Look up your specific project 4 code online for your area of interest at spatialreference.org
• For this project the

Filling in the Sinks of a DEM

It is absolutely vital for people conducting hydrological analyses to fill in the sinks contained within digital elevation models. By filling in the these sink features you are essentially limiting the number of geometric artefacts, errors from specular reflection of water, and other errors in the elevation model caused by a variety of aspects. To fill in the sinks go through the following steps:

• Go to the Modules menu in the main toolbar.
• Next navigate to the Terrain Analysis menu, expand it and then hover the mouse over Preprocessing.
• Once the Pre-processing menu has opened up beside the Terrrain Analysis, you will need to locate the fill sinks tool titled Fill Sinks (Wang Lui).
• Once you have opened the Fill Sinks (Wang Lui) tab, you select your grid system through the drop down menu beside the row entitled Grid System.
• After selecting your grid system, you go to the row entitled DEM and select your DEM file through the drop down menu.
• Once you have done this, make sure the fields Filled DEM,Flow Directions, and Watershed Basins through their drop down menus have [create] selected.
• The next step is to click Okay, since you generally don't need to edit the optional Minimum Slope row.
• After all of these steps you will have a new DEM file in which all the sinks are filled, thereby making your DEM a hydrologically correct one; and this is shown in Figure 3 for the Lake Okanagan DEM.

Figure 3. Digital Elevation Model for Lake Okanagan, British Columbia, Canada after all sinks had been filled in (Projection: NAD83(CSRS) UTM Zone 10N).

Aspect Maps and Slope Maps

• Go to the workspace and scroll down to Terrain Analysis- Morphometry
• One there click Slope, Aspect, Curvature, this will open a window.
• Select your grid system with the drop down menu on the right of the window in the row Grid System.
• You then go down to the row Elevation and go to the right and select your elevation data through the drop down menu.
• To create your Slope and Aspect maps ensure that you select [create] on the right drop down menu for those respective rows.
• Make sure that the rows entitled Curvature, Plan Curvature, and Profile Curvature have [not set] selected in their respective drop down menus.
• After completing these steps click Okay at the top right of the window.
• This will create your maps.