Supervised classification in QGIS

From CUOSGwiki
Jump to navigationJump to search

Purpose and Introduction

Every day thousands of satellite images are taken. To work with these images they need to be processed, e.g. they need to be classified. Since Remote Sensing software can be very expensive this tutorial will provide an open-source alternative: the Semi-automatic-classification plugin (SCP) in QGIS. The tutorial is going through a basic supervised land-cover classification with Sentinel-2 data. It is one suggestion to use the SCP. After running through the following workflow you will know the SCP better and you will be able to discover more opportunities to work with remote-sensing Data in QGIS. You can also find another tutorial about the SCP here [1]. Feel free to combine both tutorials.

Land cover classification allocates every pixel in a raster image to a defined class depending on the spectral signature curve. The classification will provide quantitative information about the land-use.

Installing the Software and SCP

To start the tutorial you have to download the latest version of QGIS which is QGIS 3.4.1. "Bonn" and can be found here[2]. Make sure to download the proper version for your PC (34bit vs. 64bit). After installing the software the Semi-automatic classification Plugin (SCP) must be installed into QGIS. Navigate to the menu at the top to Plugin and select Manage and Install Plugins. Following the picture, the SCP can be found while typing "semi" in the search bar. Click install plugin and now you should be able to see the SCP Dock at the right or left side of your user surface.


SCP.jpg

Obtaining the Data

In this Tutorial, Sentinel-2 Data from the south of Lake Garda, Italy is used to run the classification. The data can be downloaded from the USGS Earth Explorer website here[3]. You can find an explanation of how to download data from the Earth Explorer in the tutorial Remote Sensing Analysis in QGIS. To find the same picture used in this tutorial: select world features, search for Lake Garda and select the time period from August to October 2018. Among Data Sets, select Sentinel-2 then under additional criteria paste the entity ID: L1C_T32TPR_A008056_20180921T101647 Date: 21st of September 2018. You should find the following picture:

Sentinel-2image.JPG

Entity ID: L1C_T32TPR_A008056_20180921T101647 Date: 21st of September 2018.

It is always easier to work with cloud-free pictures, otherwise, you have to use a cloud mask.

Unpack the Data

Download the data under 'Download Options' and select the JPEG version. The image is packed in a zip-File, therefore, you have to unzip the Data before working with it. Afterwards, you can find the image data in your home directory under GRANULEL1C_T32TPR_A008056_20180921T101647IMG_DATA. For each band of the satellite data there is a separate JPEG file.

Note: Make sure to save your data in a folder that you are comfortable with. There may be added difficulty if the unzipped file is kept in your download folder or on your desktop. Additionally, a way to make the bands more recognizable and easy to manage is to rename them in their file directory to their corresponding band names. For example, RT_clip_T32TPR_20180921T101019_B03 will be renamed to Band 3 - Green (10 m). Here's a reference to all 12 Sentinel-2 bands[4]

Note: Occasionally QGIS gets confused if you rename the bands so it is best to keep them as they were.

Load the Data into QGIS and Preprocess it

To load the data into QGIS navigate to Layer at the top your user surface. Choose Add Layer, and then Add Raster Layer.... You should see the Data Source Manager now. Leave "File" selected like it is in default. Under Datasets you can navigate to the directory described above where you find the imageries. Make sure to load all JPEG files into QGIS except the file of band 10: T32TPR_20180921T101019_B10. Band 10 is the Cirrus band and is not needed for this approach.

Creating a Band set

The next step is to create a band set. Navigate to the SCP button at the top of the user surface and select Band set. Under Multiband image list you can load the images into SCP and then into the Band Set 1. Select Sentinel-2 under Quick wavelength units. As you can see, the layers are seen under Band Set 1 (e.g. Band 2 - Blue (10 m). Make sure the bands are in the right order and ascending. The picture below should help to understand these steps.


CreateBandSet..jpg


If you do not want to see a grayscaled image navigate to the SCP toolbar at the top of your surface to RGB and choose 4-3-2 to see a composite image. Additionally you can also create a virtual raster layer by selecting at the top of your toolbar RasterMiscellaneousBuild Virtual Raster.... Once the tool is open select bands 2, 3, and 4 under Input layers click OK and select the Place each input file into a separate band box then click Run. Next, double click on the Virtual layer you just created to open up the Symbology tab and for the Red, Green, and Blue bands select bands 3, 2, 1 respectfully.

Note: bands 2, 3, and 4, (blue, green, and red) change to bands 1, 2, and 3 in the virtual raster layer.


4-3-2.JPG

Note: You should deselect all the layers besides the virtual layer you created to speed up the various processes that will be done in the next steps.

Clip the Data

Since the area of the picture is very large it is reasonable to work with just a section of the image. Therefore, the SCP allows us to clip the data and only work with a part of the picture. Navigate to the SCP button at the top of the user surface, under Preprocessing you find clip multiple Raster. Your surface should look similar like in the picture below. Choose Band set 1 which you defined in the previous step.


RasterClip.jpg


To clip the data press the orange button with the plus. Minimize the SCP window and you can now define the area you want to work with while clicking with the right button on your mouse or by manually entering the UL (upper left) and LR (lower right) coordinates of the desired clip area. I suggest defining an area south of the mountains to avoid dealing with mountain shadows in the classification. In addition, in the south of the picture, the scenery is cloud-free. For instance, choose an area like this:


LakeGarda Clip.JPG


After defining the section under Clip coordinates there should occur numbers. Click run and define an output folder. In the Layer Dock, for each Band (1-9,11,12) a separate resized Raster Layer occurs. Once your clip layers have been created, you may remove the original band layers to free up some space in your layers legend.

Automatic Conversion to Surface Reflection

The last preprocessing step is to run an atmospheric correction. Go to SCP, Preprocessing, Sentinel-2 and choose the directory where you saved the clipped data. Check Apply DOS1 atmospheric correction and uncheck Add bands in a new bandset as you will only need to update the current bands you have, and not create new ones. The solar radiance should be recognized automatically. Click run and define an output folder.


S2conversion.jpg


The output files will be named e.g. like this: RT_clip_T32TPR_20180921T101019_B03.

Supervised Classification

We can now begin with the supervised classification. Make sure you see the SCP & Dock at your surface. If not, clicking this button OpenSCP.JPG in the toolbar will open it.

Set Region of Interests (ROI)

First, you must create a file where the ROIs can be saved. To do so, click Training input then this button:


Roi.jpg


Click the Create a ROI button to create the first ROI. You can define the ROI with mouse clicks, to complete it, click right.


Create ROI.JPG


In the following picture, the first ROI is in the lake. You can see that the macro class (MC ID) is named Water and the subclass (C ID) Lake. In this tutorial, only the macro classes will be significant, since it is a basic classification with only four different classes. If you want to have more specific classes you can use the subclasses. Save the ROI.


First ROI.JPG


A second option to create a ROI is to activate a ROI pointer. This can be done while clicking the plus in the red box (see the following picture) and defining the radius where the SCP should look for similar pixels. The ROI pointer is fast and works well but you have to be cautious not to include too many unnecessary features. Your ROI could look like this:


Built-up ROI.JPG


In this tutorial, 5 macro classes will be defined: water, agriculture, vegetation, urban, and roads. Since vegetation is reflecting light in NIR (Near infrared), we can visualize it in an image with false colours and therefore distinguish between healthy and unhealthy vegetation. To do so, click right on the layer Virtual Band Set 1 and choose Properties. Define Band 08 (NIR) as red, Band 04 (Red) as green and Band 3 (green) as blue like in the image below.


Editfalsecolours.JPG


If you look closely at the screenshot below, many of the agricultural fields (bottom centre) have a similar reflectance to the roads and urban environment (turquoise/grey). It is important to create an adequate amount of ROI's for each class to ensure accurate classification.


Falsecolours.JPG


Keep going setting ROIs for the five classes, you should set at least 10 ROIs per class. Try to be as accurate as possible, to make sure that pixels are assigned to the proper class. In the following picture an example of several ROIs is shown:


ROIs.JPG


Before we run the classification we can change the colours of the macro classes in the SCP Dock. You can collapse the classes by double-clicking on their names then by double-clicking on the colour fields to change their colours.

Macro.jpg


Choose an appropriate colour for every class.

Running the classification

Now go to the Classification window in the SCP Dock. You will notice that there are various options to run the classification. For instance, there are different classification algorithms: Minimum Distance, Maximum Likelihood or Spectral Angle Mapper. Feel free to try all three of them. It always depends on the approach and the data which algorithm works the best. If you check LCS, the Landcover Signature classification algorithm will be used. If you uncheck it, the chosen algorithm above will be used. In the classification of this tutorial, the Minimum Distance Algorithm and Spectral Angle Mapping came out as the best classification algorithms.


Classification.JPG


Check MC ID to use the macro classes and uncheck LCS. Click run and safe the classification in your desired directory. If areas occur unclassified go back and set more ROIs.


The output can look like this:


Classy2.jpg

Assessing the classification

You can assess the classification while comparing the true colour image with the classification layer. You can move the classification Layer above the Virtual band Set 1. Zoom into the picture and focus on an object. Checking and unchecking the classification layer allows you to verify the classes. As you see, it is difficult for the program to distinguish between unused fields and buildings.


Classification aboveLayer2.JPG Truecolours2.JPG


The following picture explains why the two classes are mixed up sometimes.


Signature2.JPG


Built-up area (brown line) and unhealthy vegetation (turquoise line) have very similar spectral signature plot and the algorithm uses these signatures for the calculation. However, you can reduce this error by setting more ROIs. Another possibility would be to include indices in the classification which are explained in the Tutorial mentioned above (Remote Sensing Analysis in QGIS). Unfortunately, you can not totally overcome the error.


You can visualize the spectral signature for every ROI. For this select the ROIs you want to visualize and click Add highlighted signatures to the signature plot.


SignatureList.JPG


The SCP provides a lot of options to achieve a good classification result. It depends on the approach, how much time one wants to spend to improve the classification. The SCP provides even more options to improve the ROIs while altering the spectral signatures for different classes. Nonetheless, it will not be possible to classify every single pixel right.

Calculate the Kappa Coefficient

A quantitative method to assess the classification is to calculate the Kappa Coefficient. First, you have to create a new layer with ROIs and set again ROIs for the four classes to have a reference ground. You can not use the ROIs you used for the classification because you want to compare the classification with undependable training input. After you created various ROIs open the SCP and go to Postprocessing, Accuracy. As your input layer choose your best classification result. The reference raster layer will be the new ROIs you just set:


Accuracy assessment.JPG


The output will tell you the accuracy for each class and the overall accuracy. The Kappa scale is from 0 to 1, 0 means the classification is not better than random, 1 means the classification is highly accurate.


Accuracy assessment Report of the Minimum Distance classification
Accuracy assessment report of the Spectral Angle Mapper classification


In the first picture you see the assessment report of the Minimum Distance algorithm and on the second the one from the Spectral Angle Mapping. Comparing both, the overall Kappa Coefficient of the Spectral Angle Mapping is a bit higher (0.943) than the one of the Maximum Distance (~0.913). However, both overall Kappa Coefficients values are very high. This is questionable and probably because too little ROIs were set in the second ROI ground reference Layer.

Conclusion

The tutorial showed one possible remote sensing workflow in QGIS and also provides an introduction into the SCP Plugin and hopefully motivated you to try out more. You can find more information about the Plugin here [5] and discover more tools the SCP offers.