Developing a Web Map Server Using GeoServer

Introduction:

This is a quick and dirty guide to getting Geoserver up running and displaying data, if you wish for a more detailed and in depth tutorial go to the geoserver manual [1]. Geoserver is a free, opensource WMS tool that allows users to upload data to a server and then serve it out to other users. The purpose of this tutorial is to show the user how to start, run, upload data, style their map, and serve it to other users.

Setting Up and Using Geoserver:

Installing Geoserver:

• Geoserver can be downloaded from the following link [2]
• Follow along with the instillation wizard, and install geoserver in your chosen directory.
• Make sure to download the manual for geoserver from the following link [3]
• Once the installation wizard has completed you can now run geoserver.

Starting Geoserver:

To run geoserver navigate to the bin folder in whatever directory you installed geoserver, and click on the startup icon. This will launch a command prompt showing diagnostic information, now that the command prompt has appeared you can access the server. Open your preferred browser and go to http://localhost:8080/geoserver/web, this will take you to the geoserver web administration page. There will be a login option at the top right had side of the page, if you set up a unique username and password during the installation enter it there, if not use the default admin as the username and geoserver as the password. This will bring you to your homepage, where you have access to all of geoservers functions and where all of your data is stored.

Figure 1: The web administration home page once you have logged into geoserver.

Adding Data To Geoserver:

In this case all data was downloaded from Geobase.ca [4]

To add data to geoserver the first thing that needs to be done is a new workspace needs to be created.

• First navigate to the workspace directory in geoserver(using the links at the side of the web administration page).
• Click the add a new workspace button in the top left hand corner.
• Choose a unique workspace name and URI(make sure there are no spaces in the workspace name).
• Then hit the submit button.

Figure 2: The workspace creation page.

Now that the workspace has been created, a layer store must be created, which will allow the user to upload and publish a layer.

• First navigate to the stores directory(using the links at the side of the web administration page).
• Click the add new store button in the top left hand corner.
• Chose your data source type, in this examples case it was a shapefile.
• Fill in your data's description and then navigate to the data that you wish to upload.
• Then hit the save button at the bottom of the page.

Figure 3: The data store creation page.

Now that the data has been loaded to geoserver it has to be published. Once you have clicked save and your data store has been created, you will be brought to the new layer page. This page will show you the data that has been upload and give you the option to publish that data. Click on the publish tab this will bring you to the layer configuration page, once you have configured your data appropriately click the save data button and now your data has been published to geoserver. Once you have published your data navigate to the layer tab on the left hand side of the page, find your data and click preview to see your data.

Notes * Make sure that the SRS is force declared. * Compute the bounding boxes by clicking on the compute from data and compute from native bounding boxs.

Figure 4: The data publishing page.

Now that you have added your data to the server, the next step in this process is to style it, so that when you request the map from the server it will have all the appropriate map elements. To add data go through the same process as described above, but make sure to change your data types.

Adding Style Elements:

When styling in geoserver a language called Styled Layer Descriptor (SLD) is used, this is an XML based language. Styling is accomplished using an XML SLD Style Document. These documents reference specific layers on the geoserver and describe how they should be displayed. The XML SLD language is somewhat complex, so if the user has no experience using the language, just follow along with the Style Document example in Figure 5. More examples of SLD Style Documents can be found in the SLD cookbook. [5] The style documents are broken down into points, lines, polygons, rasters, and text each having their own styles.

To edit the style of a layer, the layers default style must be determined.

• First navigate to the layers link on the left hand side of the web administration page.
• Click on the layer name, of the layer you wish to change the style.
• Click on the publishing tab in the edit layer page.
• Scroll down to the default style under the WMS settings and it will tell you what the default style is.

Figure 5: Showing the default style of the federal districts layer.

Now that the default style of the layer you wish to edit has been determined navigate down to the style link on the left hand side of the web administration page. Click on the style name as determined in figure 5, which was polygons, this will bring up the SLD code for this style. Now you can edit this SLD code to change how the layer looks.

Editing Existing Style Elements

Note: This tutorial will focus only on editing polygon styles, for more style examples visit [6]

One of the easiest things to do is to change the color of the polygons that you are editing. In this example the polygons will be changed from grey to a dark blue(#000080) color.

Figure 6: Example of SLD code, changing the color of a polygon to dark blue.

The color of the polygons was changed on line 24, <CssParameter name="fill">#000080</CssParameter>. This line determines the fill color for the polygons, it was changed from a grey, to a dark blue.

Once the color has been changed in the SLD code, click the validate button at the bottom of the page. This will make sure there are no errors in the code, if the code is good a message will appear at the top of the page. Once the code has been validated, go to the top of the page and in the workspace box choose your layer, and hit submit. Now the SLD code has been associated with your layer, you can go to the layer preview and look at the change in color.

Figure 7: Layer preview of the federal districts layer, with a dark blue color.

Now that the color of the polygon has been changed, lets add labels to the polygons.

Figure 8: SLD code for adding labels to polygons.

As can be seen in figure 8 the polygon labels are determined by the text symbolize from line 31 - 35. This section of code tell the server that there is a label that needs to be added to the polygons, and then through line 33 <ogc:PropertyName>ENNAME</ogc:PropertyName>, tells the server what attribute field from the layer to use as the labels. In this case it was ENNAME or English Names for federal electoral districts. At this point the color of the map was also changed to a lighter green using the code #40FF40 to make the labels easier to see.

Figure 9: Demonstrating the labels for the federal electoral districts layer.

Get Legend Graphic

...&LEGEND_OPTION=key1:v1;key2:v2;...;keyn:vn

Serving a Map

To serve a map using geoserver there are three basic tools that can be used. The first is the GetMap function which allows the user to call up maps. The WMS reflector which does pretty much the same thing as the GetMap function, but shortens it down making it easier to handle. The first two options can only be used on the IP address that you are running geoserver on. Finally there is the cascading WMS option which allows a user to access a map remotely.

GetMap

The GetMap function allows the user to call up a map from their browser, by requesting that the server generate said map.

There are a few required parameters that are used for the GetMap function

Parameter	Required	Description
Service	Yes	Service is WMS
Version	Yes	The version can be one of 1.0.0, 1.1.0, 1.1.1, 1.3.
Request	Yes	GetMap
Layers	Yes	The layer that is to be displayed on the map.
Styles	Yes	The styles in which the layers are to be rendered.
srs	Yes	The spatial reference system.
bbox	Yes	The bounding box for the map extent.
Width	Yes	The width output of the map in pixels.
Height	Yes	The height output of the map in pixels.
Format	Yes	Format for the map output. [7]

The below link would lead to a image showing the federal electoral districts from geoserver, with a width of 506 pixels, a height of 512 pixels, and in png format. This link can be modified to meet an get map request, make sure to change the layer name and remove the parentheses. This link will only work on the same network that you have geoserver on.

http://localhost:8080/geoserver/wms? (Normally used to get to the web administration page)

&service=WMS (The service that has been requested)

&Version=1.1.0 (The version of geoserver that is being used)

request=GetMap (The operation that has been requested)

&layers=FederalElectoralDistricts:FED_CA_1_0_0_ENG (The layer that has been requested)

&styles= (The styles in which the layers are to be rendered, usually left blank)

&srs=EPSG:3979 (The spatial reference)

&bbox=3658201.4942857143,658872.9742857143,9019156.614285715,6083004.862857142 (The bounding box)

&width=506 (The width requested)

&height=512 (The height requested)

&format=image%2Fpng (The image format requested)

References

Geoserver User Manual [8]