Utilizing Rstudio as an alternative GIS

From CUOSGwiki
Jump to navigationJump to search

Introduction

This tutorial is based on an earlier tutorial published by Timothy Kebbel in 2018 that focused on the use of the RQGIS package, the original version can be found here. The update has been completed as the original RQGIS package was built on QGIS2 which relies on the now deprecated Python2 as a framework [1]. An alternative package called RQGIS3 was created as a replacement but the current distribution is no longer being updated and has a bug causing it to crash RStudio on any UNIX based system [2]. Due to this critical failure the RQGIS package authors recommend using the R package qgisprocess as an alternative and thus this tutorial update will explain the use of this within RStudio as a GIS application [3].


In this tutorial you will learn how to set up an environment to utilize RStudio as a GIS application. Additionally, you will learn how to make use of various QGIS functions, including plugins for GRASS and SAGA, within RStudio by accessing their functions through commands. By the end of this tutorial the user should have a basic understanding of how to utilize RStudio, and will have gained the fundamentals necessary to explore and utilize QGIS functions within RStudio.

RStudio and qgisprocess

RStudio

RStudio is an open source IDE that utilizes the programing language “R”. Due to the nature of open source software, a wealth of packages have been developed for the “R” language. These packages allow users to perform various types of statistical analysis, modeling and geospatial processes within RStudio. Most packages are made available through the "Comprehensive R Archive Network" known as CRAN, which contains over 19,000 packages varying in scope and complexity [CRAN webpage].

qgisprocess

qgisprocess acts a bridge package between the functionality of QGIS and the IDE of RStudio. By installing this package, the user can access the geospatial processing functions found within QGIS from within RStudio. This allows for the user to utilize R as a geoprocessing workspace to modify and create new datasets, it also allows increased scripting capabilities as base R commands and QGIS functions can be chained together in a variety of ways.

Installation guides

Geomatics workstations available on campus/via remote desktop should already have both QGIS and R/RStudio installed. If you are completing this tutorial on one of those machines you can skip directly to the next section..

QGIS

We start by creating a fresh install of QGIS in order to download the functions that we will be exploring in this tutorial. QGIS can be installed from https://www.qgis.org/en/site/forusers/download.html, for the purposes of this tutorial we will be installing the 64-bit version.

Figure 1: QGIS 64-bit installer.
  • After downloading the installer, open it, select Advanced install then click next
  • We will be installing QGIS into the default root directory so click next to continue through the installer
  • Next select install from internet and then click next
  • A default directory will be created for temporary files, you can create a custom directory for these temporary files or use the default one
  • Select direct connection and click next
  • Select the host http://download.osgeo.org which will act as the provider for the download
  • Next click the circle to select install for: commandline_Utilities, Desktop, and Libs
Figure 2: Packages that will be installed within this version of QGIS Desktop.

R and RStudio

In order to utilize RStudio we first need to download R. This can be downloaded from https://cran.r-project.org/bin/windows/base/. For this installer we will be accepting all of the default paths and options.

Figure 3: R 4.3.1 installer.

Now we can download RStudio, similar to R we will be utilizing all default paths and options. RStudio can be downloaded here. At the time of writing RStudio version 2023.09.0+463 is the most current update, and requires an R installation of 3.3.0+ or above.

Figure 4: RStudio version 2023.09.0+463 installer.

RStudio setup

Now that we have all of the software that we need we can proceed with setting up RQGIS within RStudio. In order to run QGIS functions within RStudio we will need to download and unpack some packages which allow for the manipulation of spatial data. After installing these packages within the workspace we will link our workspace with the root directory of QGIS in order to gain access to its host of functions and algorithms.

Install Packages

Start by opening up RStudio and creating a new ‘’’R script’’’ file (file->new file->R script). Within this new script we will be downloading and installing some packages that allow us to manipulate raster and spatial data within RStudio. Start by adding this code to your script and running it.

#Install packages
install.packages("sp")
install.packages("RQGIS")
install.packages("rgeos")
install.packages("raster")
install.packages("rgdal")
#Attach packages to workspace
library("sp")
library("RQGIS")
library("rgeos")
library("raster")
library("rgdal")
  • sp: provides functions for plotting spatial data
  • RQGIS: Creates a link between the IDE (RStudio) and functions found within QGIS
  • rgeos: allows for the manipulation of vector data
  • raster: Provides the user to read, write and manipulate raster images within RStudio
  • rgdal: Provides the user to read, write and manipulate shapefiles within RStudio

Data Acquisition

In this tutorial we will make use of datasets that are accessible within RStudio as a method of showcasing the use of various QGIS geoprocessing functions. In order to access these datasets you use the data() function which provides the user with a list of all available datasets preloaded within RStudio. Additionally, the getData() function allows the user to download geographic data for specific countries around the world.

Setting Path

First we will make sure the working directory is set to the C: drive of your computer. This can be done using the setwd("C:")' command which will ensure all path based commands use the root C: directory as their base. You can also use this command to set the working directory for R as a different folder location, however this may cause problems if you have spaces in your file paths so use with caution. Additionally, we will make a variable called path which will point to the location that we want and input/output files to be stored. This path will then be used in subsequent commands by adding concatenating the string variable of the path with the name of the file, such as paste(path,"/output.txt", sep="")).

#Create a working directory for this tutorial
setwd("C:")
path = "C:/Users/razzroutly/Documents/Classes/GEOM4008"

Importing Data

One of the advantages of using RStudio as an alternative GIS is its ability to load open source geospatial data with just one line of code. For this tutorial we will be using the geodata package to access digital elevation models using the elevation_30s() command which will provide a raster with 30 arc second (1km) from the Shuttle Radar Topography Mission, supplemented by GTOP30 data for high latitudes [1].

We will import the dataset that used in this tutorial into our workspace and display it within the RStudio plot frame. We will be downloading a DEM of Canada from the geodata package. The getData() function downloads data from an online database.

#Digital elevation model (DEM) of Canada
canada_dem<-getData('alt', country='CAN', mask=TRUE)
plot(canada_dem, col=grey(0:100/100), main='DEM of Canada')

After running this code you will notice that the DEM's are displayed in the lower right plot window. The outputs should look like this:

Figure 6: DEM of Canada displayed within the plot window.

.

QGIS Functions

In order to utilize QGIS functions within RStudio, we first have to learn how to find the functions we want to use with their respective syntax, as well as learn what parameters we will be working with for each function. In order to do this we will be making use of the qgis_search_algorithms() and qgis_show_help() functions. The qgis_search_algorithms() function allows the user to enter a keyword for the function they are interested in using, and provides the user with a list of available functions that pertain to that keyword as well as which provider within QGIS they come from (SAGA, GDAL, GRASS, etc.), algorithims that are found in the base version of QGIS have the provider "native". After selecting the function that we are interested in using we can use the qgis_show_help() function to display a description of the use for the function as well as the input and output parameters that the function utilizes. As an example we will use the qgis_search_algorithms() function to search for a clipping function.

#Searches for functions which contain the keyword 'clip'
qgis_search_algorithms(algorithm="clip")

After running this line you will see a list of 11 clipping tools that have been displayed in the console.

Figure 7: Clipping algorithms available for use within RStudio

We will select the GDAL clipping function gdal:cliprasterbyextent and determine which parameters we will need to be able to make use of this function in RStudio. To do this we will use the qgis_get_argument_specs() function. In order to use this function we need to use the full name of the function which is gdal:cliprasterbyextent.

#Provides the user with information regarding the parameters of a function
qgis_show_help("gdal:cliprasterbyextent")

When running this line of code you will see a list of the functions parameters appear in the console. This provides you with information regarding the type of input required for each parameter and provides the user with a legend for parameters that are normally accessed through drop down boxes in QGIS.

Figure 8: Description and parameters for GDAL cliprasterbyextent function in QGIS.

Now that we know how to search for the functions we would like to use we can go on to utilize these functions to analyze DEM files.

Raster to Vector

The first algorithm we will investigate is gdalogr:polygonize. This algorithm takes a raster image and converts its features into polygons. In order to use this function we will need to determine the parameters for: input, field, and output. In order to run algorithms we use the run_qgis() function. The run_qgis() function takes in the desired algorithm as well as that algorithms parameters. Here we will convert the DEM of the Mongon study area into a shapefile using the following lines of code.

#Conversion of DEM to shapefile format
run_qgis(alg = "gdalogr:polygonize", INPUT = dem_mongon, FIELD = 'values', 
         OUTPUT = 'C://tutorial/shape_mongon')
shape_mongon <- readOGR(dsn = "C://tutorial", layer = "shape_mongon")
plot(shape_mongon)

After running this code you will see a vector interpretation of the Mongón Study area. Here is a side by side comparison between the DEM and its shapefile counterpart.

Figure 10: Shapefile of Mount Mongón displayed within the plot window.
Figure 11: DEM of Mount Mongón displayed within the plot window.

.

Clipping

Raster Clipping

In order to clip raster files we will make use of the gdal:cliprasterbyextent algorithm. This algorithm takes in a raster input, the desired clipping extent, output raster type and the desired output raster file. Additionally, I have provided a clipping extent for the image so that we can test this algorithm.

#Clipped version of the original Canada DEM
qgis_run_algorithm("gdal:cliprasterbyextent", INPUT=canada_dem, PROJWIN = "-121,-116,50.2,53.8", OUTPUT=paste(path,"/clip_dem.tif", sep=""))
canada_dem_clip<-raster(paste(path,"/clip_dem.tif", sep=""))
plot(canada_dem_clip,col=grey(0:100/100), main='Clipped Canada DEM')

After running this function we plot the raster image, the result should represent the section of Canada that we specified as the extent in the algorithm.

Figure 11: Clipped DEM displayed within the plot window.

Vector clipping

In order to clip the Vector shapefile of the Mongón study area that we created we will use the gdalogr:clipvectorsbyextent algorithm. This algorithm takes the shapefile as an input, a specified clipping extent, and a specified output for the result. Try running the code provided below.

#Take an input shapefile and clip it to the specified extent
run_qgis(alg = "gdalogr:clipvectorsbyextent", INPUT_LAYER = shape, CLIP_EXTENT = '795592,797004,8933001,8934710', OUTPUT_LAYER = 'C://tutorial/vectclip')
clipped_vect <- readOGR(dsn = "C://tutorial", layer = "vectclip")
plot(clipped_vect,main='Shapefile of the clipped Mongón study area')

The result of the shapefile clip should display the shapefile that has been clipped to the extent specified within the run_qgis function.

Figure 13: Clipped shapefile of the Mongón study area displayed within the plot window.

Laplacian Filter

In this example we will utilize a Laplacian filter on the clipped version of the Canadian DEM. The Laplacian filter will be used to highlight the edges of the mountain range and gullies. To utilize a Laplacian filter within RStudio we will use a SAGA algorithm found within QGIS, saga:laplacianfilter. In order to use the Laplacian filter we need an input raster, kernel method, Radius, and sampling method. The code to run this filter on the clipped version of the Canadian DEM is provided below.

#Creates a new raster image depicting the filtered Canadian DEM
run_qgis(alg = "saga:laplacianfilter", INPUT = canada_dem_clip, METHOD = 2, MODE = 0, RADIUS = 1,
         SIGMA = 0,RESULT = 'C://tutorial/filter_dem.tif')
laplace<-raster('C://tutorial/filter_dem.tif')
plot(laplace,col=grey(0:100/100),main = "Laplacian Filter")

The resulting output is a filtered version of the original DEM. The Laplacian filter is often used for edge detection and is useful for analyzing mountain ranges as shown below.

Figure 14: Canadian DEM filtered by the Laplacian algorithm.

Hillshade

The hillshade function creates a 3D representation of the original DEM. This function is available within RStudio and is called gdalogr:hillshade. In order to use this function we will need to set the azimuth angle and slope, we will use 270 and 40 degrees respectively. Hillshade analysis is useful for generating 3D images representative of the DEM plot. First we will create a hillshade raster with the gdalogr:hillshade algorithm, then we will overlay the original DEM to provide elevation as additional context to the image.

#Hillshade function applied to the Canadian DEM, overlain by the original DEM
run_qgis(alg = "gdalogr:hillshade", INPUT = canada_dem_clip, AZIMUTH = 270,ALTITUDE=40,
         OUTPUT ='C://tutorial/canada_hillshadecan.tif')
canada_hillshade<-raster('C://tutorial/canada_hillshadecan.tif')
plot(canada_hillshade, col=grey(0:100/100), legend=FALSE, main='Canadian Hillshade and Elevation')
plot(canada_dem_clip, col=rainbow(25, alpha=0.35), add=TRUE)

Below you can see the output generated from the hillshade as well as the output generated by overlaying the DEM.

Figure 15: Hillshade raster of the original Canadian DEM.
Figure 16: Canadian DEM overlaying the hillshade raster.

.

Conclusion

After finishing this tutorial my hope is that the user will have a functional workspace within RStudio in which they can utilize the various functions demonstrated. Additionally, I believe I have provided the tools necessary for users to explore and search for algorithms that they may need to use within their own projects. RStudio provides a unique environment for the user to create custom scripts to manage QGIS geoprocessing algorithms.