Basic Processing of Radarsat-1 data in Snap ESA
Contents
Introduction
On April 1st, 2019. NRCAN released over 35000 RADARSAT-1 scenes for open-access, with anticipation of releasing more in the future. This allows anyone to access SAR scenes covering Canada as far back as 1995 for free! This is incredible progress however, very little documentation exists on processing RADARSAT-1 products. This tutorial looks to fill this gap; providing users with basic background on RADARSAT-1, along with instructions on downloading Radarsat-1 scenes and basic processing techniques within open-source SNAP ESA software.
Overview of Radarsat-1
RADARSAT-1 was a C-Band (5.6cm wavelength) radar satellite launched 1995 in collaboration of MDA and the Canadian Space Agency. It is able to send and receive in horizontally polarized microwaves at a spatial resolution between 1m and 100m, and swath widths ranging from 18km - 500km, depending on beam mode. RADARSAT-1 went out of commission in 2013 after 17 years of supplying Canada and the world with reliable SAR data. It was Canada's first Earth observation satellite and was used across the country for tasks such as quantifying climate change, crop monitoring, marine hazard study, and disaster relief. To learn more about RADARSAT-1, visit MDA's website here, where a series of manuals are available for free that overview everything from beam-modes to file conversions.
Retrieving a Radarsat-1 Product
EODMS Account
Before we begin working in SNAP, we first have to download a Radarsat-1 product from NRCAN. We begin at the Earth Observation Data Management System. In order to download products, an account must first be created. This can be done by clicking on the Register (Required to Order) link under the Users subsection on the left-hand side of the page. Follow the on-screen instructions to create your account, confirm your email, and change your password.
If you already have an account, log into EODMS by clicking on the Login link under the Users subsection on the left-hand side of the page.
Finding a Scene
Once an account is created, we can begin searching for a scene. Begin by clicking the Search tab under the Getting Started subsection on the left-hand side. What will appear are a series of grey boxes indicating the steps needed to locate and download our scene. Each numbered step below corresponds to the like numbered grey box.
1. The first step is to select our area of interest. This can be done is numerous ways, as indicated by the eight different drop-down menu's under this step. For this example, Draw an Area will be used. Information on the use of each tool can be found by selecting the ? beside each drop-down.
- A. Begin by using the map on the right half of the screen to zoom into an area of interest, for this example I will be focusing on the oil-sands operations around Fort McMurray Alberta.
- B. Select the Draw and Area drop-down menu and then the Rectangle option. Draw the rectangle around an area that you wish to be included in your scene. See Figure 2 for an example.
2. Once an area of interest is selected, our date range must be selected. Select the Date Range option and input dates between which you wish to find a scene. For this example, I am looking for any images in 2012.
3. Now, we must select which type of data we are looking for. Select ONLY the RADARSAT-1 Open Data Products check-box, this can be found under the Radar Satellites Subsection.
4. The next step is to select specific options we wish our data to have. This includes a certain incidence angle range, beam modes, pass direction and so on. These steps are for the most part optional, as they depend mostly on the study being conducted, however, for our case we need a specific beam mode. Under the Beam Mode selection box, select Standard.
NOTE: Due to a bug within SNAP, we can only work with Standard beam mode imagery. Standard beam-mode imagery is not available everywhere, so this may affect your search results.
5. Once all above steps are completed, select the Search button. If results are found, a new Results tab will open showing all matching results. If no results are found, refine your search dates and/or search area until results are found.
Downloading the Scene
The Results will list all scenes that match your search criteria, and will look something like Figure 1. Hover over each result to highlight its footprint on the map. Select a scene you wish to work with and check the Order box. In the new window that appears, check the box under the Select item(s) tab and then the Update Cart button. This will close the window and open a forth tab titled Cart. In this tab you will see your scene listed. Click the Submit Satellite Product Order button. This will open a window asking for the Order Priority and Delivery Destination(s). Leave both of these as their defaults and click the Order button.
Once submitted, an email will be sent confirming your order, along with a notice that another email will sent once the scene is ready for download. This second email could take some time to arrive depending on the amount of traffic on EODMS when your order is sent in. Once this email arrives, select the HTTPS link within the email, this will open a tab in your internet browser. In this tab, click the link beside the file icon, followed by the link ending in .zip to download your scene. Save it to a place that is easily accessible later.
Snap ESA Introduction
Get Snap ESA
Snap ESA software can be downloaded at the following link [1]. Click the Download link in the Sentinel Toolboxes row that corresponds to your OS. Once the installer is downloaded, follow the instructions to install the software package onto your computer. When the portion of the installer asking to configure the Python library appears, skip this section as it will not be used in this tutorial or for most small processing scenarios.
Load a Scene & GUI Overview
To load our scene into SNAP, first unzip the product, then within SNAP navigate to File->Import->SAR SENSORS->RADARSAT 1. Navigate to the location your scene was extracted into using the file browser and open the corresponding file. If no file appears under this browser, instead navigate within SNAP to File->Open Product. Navigate to the location your scene was extracted into and open the file with the extention ".vol" or the name "vdf_dat.001". The file naming conversion was changed at some point during RADARSAT-1's lifetime, which is the reasoning for two file options.
NOTE: Due to the age of the data, there is a chance an error will occur on the import step due to corruption. If this is the case, you will need to go back to the previous steps and download a new scene.
If opened successfully, a product should appear in the Product Explorer window on the left. Press the '+' to the left of the product name to expand it into several folders of data. The one we are most interested in is the Bands folder, expand it. Inside will be two bands, Amplitude and Intensity, double-click Amplitude to open it in the product viewer on the right side. Use the scroll wheel (or the magnifying glass icon on the top toolbar) to zoom in and out on the product. To explore the product, select the hand icon on the top toolbar and click & drag around the product. Notice as the cursor is moved around on-top of the product, the line-pixel coordinates and lat-long coordinates in the lower right corner are updated. The extents of the current view on the map can be seen by selecting the Navigation tab in the lower left section. A histogram, along with some rough statistics for our product can be found in the tab beside, labeled Colour Manipulation. Your SNAP interface should look similar to that in Figure 3 (with a different scene of course) if the previous steps have been done correctly.
Now that some basic navigation has been established within the SNAP environment, lets begin processing our product.
Subset
The first step within SNAP that should be conducted is to create a subset of your specific study area. This is not a required step, as the full scene can be used for this tutorial, just be aware that using the full scene will require longer processing times than using a subset.
Begin by navigating to Raster->Subset. A window as per Figure 2 should appear. Within this interface, we can subset in three ways: Drawing a subset area, Pixel coordinates, or Geographic coordinates. If your subset area does not need to be precise, the easiest method is to simply manipulate the subset bounding box on the map. If precision is necessary, enter the geographic coordinates. If entering coordinates, make sure your subset region bounding box appears on the map, if not, your study area may not be within the image bounds. Once your preferred subset region has been set, hit OK. A new product will appear within the Product Explorer. Open up the Amplitude band as described in the previous step, notice how the image has been clipped to only contain your study region.
Speckle Filter
The next step we need to conduct in processing our scene is to run a Speckle Filtering operation. Speckle is the salt-and-pepper effect that appears in radar imagery. Generally this is considered error or noise and should be averaged out to remove false returns and achieve a better insight on return from the ground. Select the subsetted product (or the original scene that was imported into SNAP if subsetting was not conducted), and then navigate to Radar->Speckle Filter->Single Product Speckle Filter. A window will appear with two tabs as per figure _.
The first tab contains input and output parameters, most of which should be auto filled. Make sure the correct input file is selected, the output name can be left the same, change the directory to your working directory using the .... The output format that should be used in intermediate steps is BEAM-DIMAP, SNAP's format.
The second tab contains the operation settings. For this example, Select Amplitude as our source band, a Boxcar filter, and X & Y filter size of 5.
With these parameters set, hit Run. A new object will appear within the Product Explorer once the task is completed. Open up your Amplitude band has before, and notice how the filtering has smoothed out our image. Below the product explorer, open the Colour Manipulation tab and look at the histogram. Compare it to the histogram of the non-filters product and notice how it has become a smoother and better defined bell. Feel free to try other filtering methods and filter sizes to compare and contrast their differences.
Slant-Range to Ground-Range
The final processing step is to convert our scene from slant-range to ground-range. Our scene in its current form is orientated on an imaginary slant relative to the sensor in range and azimuth coordinates. This means the image is positioned relative to the sensors flight path and not general map coordinates. To convert our image to mapping coordinates, the image must be re-sampled in a process known as an ellipsoid correction. To perform this operation, select the filtered product in the Product Explorer, and navigate to Radar->Geometric->Ellipsoid Correction->Geolocation-Grid.
Same as the previous step, a window with two tabs will appear. The settings for the first tab are the same as the previous step. In the second tab, select the Amplitude band, and pick a re-sampling method (I recommend Bilinear Interpolation), and finally select a map projection. I good option to select for this setting is UTM / WGS84 (Automatic), which will determine which UTM zone to use automatically. Once prepared, hit Run. A new tab will appear in the Product Explorer once the process is completed. The product is now ready for export.
Final Product
Upon completion of the last step, we now have a usable RADARSAT-1 product, however it is still in SNAP format and must be converted. To finish off our product, we will convert it into a GeoTiff. Select the ellipsoid-corrected product in the product explorer and navigate to File->Export->GeoTiff. Navigate to the location on your computer to which you wish to save the product and click Export Product. Once complete, your product is ready! It can be imported into any GIS for further analysis, for example QGIS as seen in Figure _.
References
https://mdacorporation.com/geospatial/international/satellites/RADARSAT-1
