Exploring a subset of SAGA's Terrain Analysis tools

From CUOSGwiki
Jump to navigationJump to search

Purpose and Introduction

The purpose of this tutorial is to introduce the reader to a subset of the raster terrain analysis tools featured in SAGA GIS. Importing and Visualizing data will be discussed, and instruction will be provided regarding the functions of several of SAGA's Morphometry Terrain Analysis tools.

This tutorial will cover the use of basic digital elevation map analyis procedures such as finding the slope and aspect of a surface, more advanced operations such as analytical hillshading, plan curvature, vector terrain ruggedness, and the automatic classification of landforms and landform elements.

Software

SAGA is a free and open source program which can be downloaded here: http://www.saga-gis.org/en/index.html

It runs on Windows or Linux operating systems, and can be run within a virtual machine.

Data

The data used in this tutorial are 1 m elevation data, though any digital elevation model (DEM) will work in this tutorial. Similar data can be found online on sites such as GeoGratis (http://geogratis.gc.ca/geogratis/en/search), and will be free and easily downloadable.

Tutorial

Importing data

To import your data into SAGA you must enter the Tools section and select GDAL/OGR > Import Raster


FileImport.png


Select the 3 dots button beside files and select your file. Multiple Bands output is automatic but if you want to select specific bands check the Select from Multiple bands button below. Once everything is selected, hit apply and then execute.


Importraster1.png


Data visualization

In the left window manager under data, right click on the data you have just imported and click "Add to Map", and the data will now appear in SAGA's view window.

Addingdata2.png

Depending on the raster uploaded it may come out with a colour scheme or in Greyscale. To better visualize the change in elevation, you can change the colour scheme by clicking the colour scaling option in properties. If the properties window pane isn't shown select this button: PropertiesButton3.png

PropertiesSettings4.png

Next click on the colourful button to have more colour scaling options to choose from:

Colours5.png

Finally select "Apply" and "Save"

Colourchange4.png

Analytical Hillshading

You will find the Analytical Hillshading tool under Terrain Analysis: Lighting, Visibility


Hillshade1.png


Within the tool window, specify the current grid system, as well as the elevation layer with the first imported data, and click okay:

AnalyticalHillshade6.png


The output file will now appear in the Data tab under Tree. Right click the layer and select "Add to Map", making sure to add it to the initial map and not into a new window:

Hillshade3.png AddtoMap7.png

Next in settings change the transparency to 40% or however transparent you want the layer to be, so that both layers are visible and click Apply:

Transparency8.png

The resulting image should look like this:

AHResults9.png

Basic Terrain Analysis

Within the toolbox, under Terrain Analysis: Morphometry, you will find the Slope, Aspect, Curvature function.


SlopeAspectCurve.png


This is a batch process and it will produce 15 new fields at once. As seen below, enter the current grid system into the first field, the elevation data into the second field, check create for the fields you are interested in and leave the remaining fields set to <notset>:


SlopeAspectCurve2.png


A subset of the results from this function are as follows:


Slope:


SlopeTM.png


Aspect:


AspectTM.png



Profile Curvature:


ProCurveTM.png


Zoomed in profile curvature:

ProCurveZoomin.png

Plan Curvature

The plan view curvature function found within the SAGA toolset is important for work in understanding variations in man-made and naturally occurring terrain. This tool can be used in fields such as road safety and maintenance, coastline monitoring, tracking mass wasting events, as well as watershed mapping.

Plan curvature by definition is the curvature in a horizontal plane. Positive curvature values indicate a convex contour within a cell, and negative curvature values indicate a concave contour within the cell, with respect to surrounding cells (http://www.et-st.com/et_surface/userguide/Raster/ETG_RasterCurvature.htm).


The resulting image for Plan Curvature is as follows:


PlanCurveTM.png


Zoomed in plan curvature:


PlanCurveZoomin.png


In the plan curvature output blues represent a negative value (concave curvature), and red indicates a positive curvature (convex contour). The striated sections seen above in the output are over water and therefore have no definitive curvature, and are smooth in comparison. These areas could be removed to help the overall effectiveness of the map.

The small scale variation in curvature seen in the zoomed-in output above shows curvature variation in a low lying area. This information could be used to better understand the watershed and its extent.

Vector Terrain Ruggedness

For the following instructions, a digital elevation file of northern Oregon was used.

OregonDEM.PNG


Vector terrain ruggedness is a measure of the ruggedness of terrain, calculated by measuring the dispersion of slope vectors orthogonal to grid cells within a neighbourhood. In effect, this is a measurement of the combined variability in both slope and aspect. Ruggedness ranges between calculated values of 0, representing no terrain variation, to 1, representing complete terrain variation. Vector Terrain Ruggedness is primarily used in the study of animal habitat models [1]

in SAGA GIS, Vector terrain ruggedness is calculated using the Vector Ruggedness Measure tool. It can be found under Terrain Analysis: Morphometry.


Terrain ruggedness selection.PNG


Within the tool window, specify the current grid system and the elevation map to be used for analysis and press "okay".


TerrainruggednessSettings1.PNG


The resulting ruggedness measurement image is as follows.

OREGONTRugged.PNG

As expected, the ruggedness is highest in areas with high variability in slope and aspect.

Fuzzy Landform Element Classification

For the following instructions, a digital elevation file of Gatineau Park was used.


Gatineau.PNG


The Fuzzy Landform Element Classification tool uses fuzzy logic to approximate landform elements in an area. it is an unsupervised classification method that requires very little computing time compared to methods such as TPI Based Landform Classification. The analysis of landform elements is an important part of the field of geomorphometry [2]

To begin, use the Slope, Aspect Curvature tool to create slope, maximum curvature, minimum curvature, profile curvature and tangential curvature rasters from your DEM. Make sure the Slope Units field and the Aspect Units field are set to Degree.


Gatineau options.PNG


To begin the classification, select the Fuzzy Landform Element Classification tool from Terrain Analysis: Morphometry


Gatineauselections.PNG


Then, enter the rasters that you created in the previous steps into their appropriate fields, as shown.


Gatineaufuzzyoptions.PNG


The raster labeled "Landform" contains the now-classified landform elements. the classified landform raster should look like this:


Gatineaufuzzy.PNG


A legend with labels is automatically generated for the raster. it is shown below:


Fuzzy legend.PNG


TPI Based Landform Classification

For the following instructions, a digital elevation file of Gatineau Park was used.


Gatineau.PNG


Topopgraphic position index, or TPI,is an algorithm for determining an object or point's relative topographic position to a landform. TPI works by comparing the value of each cell in a DEM with the mean value of its neighbourhood. Positive values indicate areas of relatively high elevation, like ridges. Negative values indicate areas of relative lows, like valleys. Values close to zero indicate areas of constant slope. TPI depends heavily on the scale of the analysis, with smaller scales providing significantly less detail. combining both small and large scale TPI allows for the classification and interpretation of many landforms. is useful in that many processes acting upon natural landscapes are heavily influenced by relative topography, and API provides a means of measuring topographic setting [3].

In SAGA GIS, the TPI interpretation of landforms is accomplished with the TPI Based Landform Classification Tool, found under Terrain Analysis:Morphometry.


TPIlandselection.PNG


The TPI Based Landform Classification Tool only requires a DEM to function. Depending on available processing power and the resolution of your DEM, geoprocessing can take a long time. Enter the DEM into the Grid System and Elevation fields in the appropriate fields, as shown below:


Tpilandformsoptions.PNG


Once geoprocessing is complete, the output should resemble the image below


Tpilandforms.PNG


A labeled classification scheme for the created raster is automatically generated. It can be seen below


Tpilegend.PNG

Reference

Hengl, T., & Reuter, H. I. (2013). Geomorphometry: concepts, software, applications. Retrieved from https://books.google.ca/books?id=u33ArNw4BacC&lpg=PA227&ots=h9MkkvRK_B&dq=geomorphometry%20landform%20elements&pg=PA227#v=onepage&q&f=false

SAGA software: http://www.saga-gis.org/en/index.html

Sappington, J.M., K.M. Longshore, and D.B. Thomson. 2007. Quantifiying Landscape Ruggedness for Animal Habitat Anaysis: A case Study Using Bighorn Sheep in the Mojave Desert. Journal of Wildlife Management. 71(5): 1419 -1429 [4]

GeoGratis: http://geogratis.gc.ca/geogratis/en/search

http://www.et-st.com/et_surface/userguide/Raster/ETG_RasterCurvature.htm

Weiss, A.D. (2000): Topographic Position and Landforms Analysis. poster. [5]

Retrieved from "https://dges.carleton.ca/CUOSGwiki/index.php?title=Exploring_a_subset_of_SAGA%27s_Terrain_Analysis_tools&oldid=18778"